Lighting Effects
There are 333 products.
WR LED (Wireless Remote)
1321000047AccessoriesWireless Remote LED Lamp Controller- Control: colors, fade, strobe, dimming & auto-programs - Compatible with MR RGB 12V, MR RGB E27, MR RGB GU 10, LED Color Tube, LED Color Ball und Flex RGB control
-
-
Light Bridge One
1731000003AccessoriesVideosSpecifications - High Tech, Portable Triangle Steel Truss system - Extremely strong for heavier loads of lighting (No sagging) - Quick Release pins for easy assembly (no need for clamps) - Mou
-
CAT6S 30m AV6 FIRST CABLE
122630004130m CAT6 First Cable, Standard, Ethercon Type, Connector on one end, standard RJ45 Connector on opposite end. For use between MCTRL300 and first AC6 Panel Video Wall
-
MCTRL300
1226300034The MCTRL-300 is a controller for ADJ's AV6 LED video panels. It features one DVI signal source input and two RJ45 pixel-data outputs for 2 independant screens. The controller is easily configured via USB and it will drive up to 1.3 million pixels suppor
-
AV6FC 8pcs Flight Case
1226300049Specifications - Fits 8 AV6 video panels - 9mm Plywood - Butterfly Latches - Swivel Castors - Steel Ball Corners - Foam Inlay - Outer dimensions (LxWxH): 1.01 x 0.66 x 0.82m
-
MCTRL 660
1226300052 -
CAT6 CBL 15m
1226300043 -
Power Con Schuko 7,5m
123910026815m Powercon main cable, powercon to Edison (3x2,08mm2) cable gauge)
-
Power Con Schuko 15m
123910026715m Powercon main cable, powercon to Edison (3x2,08mm2 cable gaugae)
-
CAT6S 15m AV6 FIRST CABLE
122630004015m CAT6 First Cable, Standard, Ethercon Type, Connector on one end, standard RJ45 Connector on opposite end. For use between MCTRL300 and first AC6 Panel Video Wall
-
-
-
Power Con Schuko 3,0m
12391002703,0m Powercon main cable, powercon to Schuko (3x2,08mm2, cable gauge)
-
-
CAT6S 7,5m AV6 FIRST CABLE
12263000397,5m CAT6 First Cable, Standard, Ethercon Type, Connector on one end, standard RJ45 Connector on opposite end. For use between MCTRL300 and first AC6 Panel Video Wall
-
-
-
-
-
-
-
-
Floor stand 4 legs black FS4LB
1226100032To turn your PAR can into a floor PAR simply open the floor bracket and fix it to the existing bracket of the PAR can.
