APX1000 Expand

APX1000

Alto Alto

New

2-Channel 1000 Watt Power Amplifier

More details

b1ab809e4853a4f516c48c1090967312.jpg
4be56e85c9e003db3287cb6c61de5099.jpg
d19c8ed7ec94dd6f39aa0953acf7c95c.jpg

Experience the APX Difference With 1000W of Pure Power

The APX1000 delivers continuous, clean, stereo power to any live performance. Whether you are a sound contractor, gigging musician or live sound engineer, you need consistently clean power from your power amplifiers and  the APX1000 brings it to every performance. The APX1000 provides a continuous 2 x 250W at 8ohms, or 2 x 500W at 4 ohms. In bridged mono mode, the APX1000 pumps out 1000 crystal-clear watts of power. Weighing in at only 12.1 lbs., the APX1000 goes into venues with amazing ease and convenience whether used in a permanent installation or portable application. The incredible power-to-weight ratio and performance quality of the APX 1000 means you'll get solid Class D power without breaking your back or your wallet. 

Things can sometimes move at light speed on the stage. Connecting an amp should never slow you down. Balanced combo ¹/4” XLR, inputs, "Touch-proof" binding posts and speak-on jacks make connecting the APX1000 a snap at any gig, so you never lose precious time getting things going. Once installed, the APX1000's level and clip indicators to keep you informed of performance levels at a glance. Experience the APX1000 for yourself, or check out the APX1500 for installations and gigs requiring a little more power.

The APX1000 amplifier supplies massive power with plenty of headroom to drive any passive speaker. The APX1000 also contains low-noise cooling fans to prevent overheating and high-current toroidal transformers for the lowest possible noise floor.

 
 

Applications

  • Live sound systems
  • DJ systems
  • Touring rigs
  • Installations
  • Arenas and stadiums
  • Houses of worship

TECH INFORMATION

Power Specifications: 
Continuous power (20 Hz – 20 kHz):
Both channels driven: 2 x 390 W at 4 ohms, 2 x 250 W at 8 ohms (0.5% THD), 2 x 500 W at 4 ohms, 2 x 270 W at 8 ohms (1.0% THD EIAJ)
Bridged mono mode: 1 x 1000 W at 8 ohms, 1 x 520 W at 16 ohms
Input Sensitivity: 1.0 V
Input Impedance: 10 K Unbalanced
Frequency Response: (at 10 dB below rated output power), 20 Hz - 25 KHz (+0/-3 dB)
Voltage Gain: 32 dB
Distortion: (SMPTE-1M) <0.5%
S/N Ratio: 110 dB
Protection: On/Off, mute, DC-fault, load
Controls Front: Front Controls: AC power switch, 2 channel level control; –8 to +30 dB
Controls Rear: 30 Hz high-pass filter on/off, bridge/stereo/parallel mode
Signal Indicators: Signal present (green LED), clip (red LED), protection (red LED)
Power Indicators: 1 blue LED integrated with power switch
Input Connectors: Balanced XLR-F / ¼” combo
Output: Touch proof binding posts and Speakon® NL4 connectors
Power Supply: AC Power: 100 VAC, or 110 – 120 VAC or 220 - 240 VAC (50 / 60 Hz)

 

 
 

Dimensions (WxLxH): 19in x 11.2in x 3.5in
Weight: 12.1 lb

Accept Site use cookies