This product is no longer in stock
The Laserworld PL-20.000RGB show laser light is completely equipped with diodes and has a good white balance, with linear color fading behaviour and high visibility.
The device can be controlled over ILDA and is graphics capable:
Advantages of the Laserworld PL-20.000RGB laser light are:
The Laserworld PL-20.000RGB has a beam diameter of about 6.5 mm and beam divergence of only 1.3 mrad.
Guaranteed output power at aperture is 18'000mW. 5'000 mW / 638 nm (red), 4'500 mW / 520 nm (green), 10'000 mW / 450 nm (blue).
Fast scanners work at a speed of 30 [email protected]°ILDA and can do a max. scan angle of 60°.
The complete projector is built with Sealed Housing Technology and is cooled through the external cooling fins (bottom part). Thus the maintenance effort is kept very low.
The show laser has an internal PSU for easy handling.
At the back of the unit there are trim pots for color settings, so the color balance can be quickly adjusted. The X- / Y-axis offset can also be set by trim pots. Additionally the Scan Safety can be set at the back side of the laser system.
|Guaranteed power at aperture:||18000 mW|
|Power Red:||5'000 mW / 638 nm|
|Power Green:||4'500 mW / 520 nm|
|Power Blue:||10'000 mW / 450 nm|
|Beam Specifications:||ca. 6.5 mm / 1.3 mrad|
|Scanner:||30 [email protected]°ILDA|
|Scan Angle max.:||60° max.|
|Accessories:||key, power cable, manual|
|Power Supply:||internal PSU|
|Power Consumption:||260 W|
|Dimensions:||497 x 330 x 215 mm (L x W x H)|