Processed Active Speaker
400W + 100W RMS – 128DB SPL
The new Verve Speakers Series features birch plywood enclosures with a scratch resistant textured paint finish, entirely ‘Made in Italy’ and offers outstanding performance at competitive prices. New high efficiency PWM and very light yet powerful class D integrated amplifiers, a new digital signal processor with 4 EQ presets with an extremely low noise floor. VERVE speakers are equipped with constant directivity rotatable horns, high efficiency woofers and HF compression drivers, higher quality protected crossover networks.
Verve is also available in white
Verve is also available in white
- 5 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
- Bi-amplified models with high dynamic Class D amplifiers 400W + 100W RMS to provide a pleasant sound even at loud volume
- New ultra-light woofers custom made for FBT with a weather resistant coating, extremely reliable and efficient
- High efficiency switch mode power supply
- Advanced filter algorithms including dynamic equalization at low frequencies and advanced energy control to allow high SPL while always granting reliable and distortion-free audio reproduction
- An increase in total SPL thanks to FBT’s new digital limiter algorithms and increased amplifier power output
- Passive models: soft-trip high-frequency protection circuitry to ensure proper operation even in overdriven conditions and superb quality components, metallic polyester condensers and large diameter coils. All components embedded in special resin to ensure total immunity to vibration
- Fully rotatable constant directivity horn to adjust HxV angle coverage in the non-coaxial models
- Ergonomic integrated carrying handles, M10 rigging points, top-hat speaker stand socket and wall bracket mounting hardware
- 200 mm (8”) LF woofer with 50 mm (2”) voice coil, custom made for FBT.
- 25 mm (1”) exit throat B&C HF compression driver with 36 mm (1.4”) voice coil.
- Frequency response from 65Hz to 20 kHz.
- 80°H x 50°V Constant Directivity Horn.
- Wall bracket mount flange plate, 35 mm (1 3/8 ”) top-hat speaker stand socket.
- 2-way, bi-amplified, bass reflex design.
- Bi-amped: 400W RMS LF, 100W RMS HF, Class D power amplifiers.
- Digital Signal Processor with 4 Equalization Presets.
- 15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing.
- High efficiency switch mode power supply.
- Control Panel features balanced XLR/Jack input and XLR LINK OUT, Volume, EQ Presets, HP Filter, 3 status indicators
| Code: | 35966 |
| Configuration: | 2 Way |
| Built-in amplifier LF/HF: | 400/100w RMS |
| Built-in amplifier peak LF/HF: | 800/200w |
| Frequency response: | 60hz - 20 kHz |
| Low Frequency woofer: | 8" with 2" VC |
| High Frequency driver: | 1" with 1.4" VC |
| Maximum SPL cont/peak: | 121 / 128dB |
| Dispersion: | 80 x 50 (HxV) |
| Input impedance: | 22kohm |
| Crossover Frequency: | 2.2kHz |
| AC Power requirements: | 450VA |
| Input connector: | XLR with link out |
| Power cord: | 5M IEC |
| Net Dimension (WxHxD): | 268 x 500 x 270mm |
| Net Weight: | 11.6kg |
| Transport Dimension (WxHxD): | 396 x 607 x 345mm |
| Transport Weight: | 13.6kg |
