The DX400 is a robust, one rack space amplifier suitable for the smaller PA system and studio monitoring.
Product Description
The DX400 is a robust, one rack space amplifier suitable for the smaller PA system and studio monitoring.
The steel enclosure houses the reliable bi-polar amplifiers that are cooled by twin variable speed fans. Signal inputs are via xlr, jack and RCA phono connectors whilst the outputs have binding posts and industry standard 4 pole connectors. Signal status employs SIG and CLIP leds and volume is controlled by individual level controls. Its small size and low weight make it a great full range amplifier that will sound good on live or monitoring duties.
Product Features
DX400 2 x 200W COMPACT 1U POWER AMPLIFIER
- Small size only one rack space
- Multiple inputs on XLR, jack and phono
- Switchable limiter
- Ideal for live and monitoring
Product Specification
| Output power per channel @ 4 ohms | 200W RMS |
| Output power per channel @ 8 ohms | 120W RMS |
| Input sensitivity | XLR & Jack : 0dBu RCA : +6dBu |
| Input impedance | 10k ohm balanced 20k ohm unbalanced |
| Frequency response | 5Hz - 20kHz +0/-1dB |
| Voltage gain | 31dB |
| Distortion @ 1kHz | 0.01% |
| Signal to noise ratio | 95dB |
| Damping factor | 150 |
| Cooling | Twin variable speed fans. Rear to front airflow |
| Protection | D.C. short/open circuit, thermal |
| Status LEDs | Power, Signal, Peak |
| Connections : Inputs | XLR, Jack, RCA phono |
| Connections : Outputs | 4 pole industry standard sockets, binding posts |
| Power requirements | 230V model : 220-240V ~ 50/60Hz |
| 115V model : 110-120V ~ 50/60Hz | |
| Power consumption 1/3rd power pink noise | 2.5A @ 230V, 5A @ 115V |
| Size (wxhxd) | 482mm(19") x 44mm(1.75") x 375mm(14.8") |
| Weight (net/shipping) | 10.2kg(22.4lb) / 13.1kg (28.8lb) |
