This product is no longer in stock
The RTI NANO RYGCB 35 (OPSL) show laser projector fulfills highest requirement in terms of brightness, beam divergence and accuracy.
This RTI show laser system is equipped with highly sophisticated Coherent OPSL laser modules. RTI NANO RYGCB 35 (OPSL) has a beam diameter of 2.7 mm and a beam divergence of ca. 1.0 mrad.*
This fact results in an increase of brightness in comparison to diode laser sources. The excellent beam specifications makes this laser projector ideal for graphics projections and long distance projections but also for beam effects, which have to be seen over long distances.
The RTI NANO RYGCB 35 (OPSL) has a guaranteed output power of 30'500mW - full color RYGCB (5 W 639 nm red, 5 W 577 nm yellow, 16 W 530 nm green, 5 W 488 nm cyan, 4 W 460 nm blue).
Possible custom configurations: up to 2 sources per color possible! Please ask us!
The compact built laser system has a durable and waterproof housing according to IP54.
The RTI NANO RYGCB 35 (OPSL) comes with CT-6210H scanners as a standard. The scan speed of 60 [email protected]° ILDA and a maximum scan angle of 80° (@35 kpps) allow to run the system at many various events.
This RTI NANO projector is equipped with an ILDA interface for standard computer control and comes with an advanced main board control via browser interface. It is possible to access the configuration settings for color, scanning and other parameters directly through a browser application by connecting to the laser via LAN (W-LAN with suitable access point). With this browser interface it is no longer necessary to physically access the laser projector (that is probably mounted in several meter height). All configurations can be set remotely from any computer (PC, MAC, Linux), tablet or even mobile phone.
In addition to that it is possible to order optional control modes, like LAN, DMX, SD-card or auto mode. Even W-DMX and a detachable remote control pad are available on request.
The device can be equipped with CT-6215HP Big Boy Driver scanners and low divergence optics: 60 [email protected]°ILDA, max. 80° (@30 kpps); beam diameter of ca. 5.5 mm and a beam divergence of only 0.6 mm.
* depending on the collimators; information based on our recommended standard optics.
|Guaranteed power at aperture:||30'500 mW|
|Power Red:||5'000 mW / 639 nm|
|Power Yellow:||5'000 mW / 577 nm|
|Power Green:||16'000 mW / 530 nm|
|Power Cyan:||5'000 mW / 488 nm|
|Power Blue:||4'000 mW / 460 nm|
|Beam Specifications (full angle):||CT-6210H + standard optics: ca. 2.7 mm / 1.0 mrad or optionally CT-6215HP + LD optics: ca. 5.5 mm / 0.6 mrad*|
|Laser Sources:||Coherent Taipan OPSL|
|Operation Modes:||ILDA; optional DMX, Auto, LAN, SD-card, W-DMX|
|Scanner:||CT-6210H Scanner inkl. RTI RayScan driver, 60 [email protected]° ILDA; optional: CT-6215HP Big Boy Driver 60 [email protected]°ILDA, max 80° (@30 kpps)|
|Scan Angle max.:||80° max. (@35 kpps)|
|Accessories:||Browser interface (integrated), manual, key, power cable; optional: detachable remote control pad incl. patch cable|
|Power Supply:||85-250 V AC 50/60 Hz|
|Power Consumption:||1200 W|